GD.pm - Interface to Gd Graphics Library

DESCRIPTION

The gd Graphics Library

• Reading and writing GIF files.
• Drawing lines, rectangles, arcs, ellipses and text.
• Flood fills.
• Using arbitrary images as tiled patterns for filling shapes.
• Using arbitrary images as paintbrushes.
• Stamping a portion of one image onto another, optionally resizing
• Simple text rendering.

The GD.pm interface

It defines the following three classes:

GD::Image

An image class, which holds the image data and accepts graphic primitive method calls.

GD::Font

A font class, which holds static font information and used for text rendering.

GD::Polygon

A simple polygon object, used for storing lists of vertices prior to rendering a polygon into an image.

Notes:

1.

To create a new, empty image, send a new() message to GD::Image, passing it the width and height of the image you want to create. An image object will be returned. Other class methods allow you to initialize an image from a preexisting GIF, GD or XBM file.

2.

Next you will ordinarily add colors to the image's color table. colors are added using a colorAllocate() method call. The three parameters in each call are the red, green and blue (rgb) triples for the desired color. The method returns the index of that color in the image's color table. You should store these indexes for later use.

3.

Now you can do some drawing! The various graphics primitives are described below. In this example, we do some text drawing, create an oval, and create and draw a polygon.

4.

Polygons are created with a new() message to GD::Polygon. You can add points to the returned polygon one at a time using the addPt() method. The polygon can then be passed to an image for rendering.

5.

When you're done drawing, you can convert the image into GIF format by sending it a gif() message. It will return a (potentially large) scalar value containing the binary data for the image. Ordinarily you will print it out at this point or write it to a file.

Contents

1. Creating and Saving Images
2. Color Control
3. Drawing Commands
4. Image Copying Commands
5. Character and String Drawing
6. Miscellaneous Image Methods
7. Polygons
8. Fonts
9. Copyright Information

Method Calls

Creating and Saving Images

new

GD::Image::new(width,height) class method

To create a new, blank image, send a new() message to the GD::Image class. For example:

$myImage = new GD::Image(100,100) || die;

This will create an image that is 100 x 100 pixels wide. If you don't specify the dimensions, a default of 64 x 64 will be chosen. If something goes wrong (e.g. insufficient memory), this call will return undef.

newFromGif

GD::Image::newFromGif(FILEHANDLE) class method

This will create an image from a GIF file read in through the provided filehandle. The filehandle must previously have been opened on a valid GIF file or pipe. If successful, this call will return an initialized image which you can then manipulate as you please. If it fails, which usually happens if the thing at the other end of the filehandle is not a valid GIF file, the call returns undef. Notice that the call doesn't automatically close the filehandle for you.

To get information about the size and color usage of the information, you can call the image query methods described below.

Example usage: open (GIF,"barnswallow.gif") || die; $myImage = newFromGif GD::Image(GIF) || die; close GIF;

newFromXbm

GD::Image::newFromXbm(FILEHANDLE) class method

This works in exactly the same way as newFromGif , but reads the contents of an X Bitmap file:

open (XBM,"coredump.xbm") || die; $myImage = newFromXbm GD::Image(XBM) || die; close XBM;

newFromGd

GD::Image::newFromGd(FILEHANDLE) class method

This works in exactly the same way as newFromGif , but reads the contents of a GD file. GD is Tom Boutell's disk-based storage format, intended for the rare case when you need to read and write the image to disk quickly. It's not intended for regular use, because, unlike GIF or JPEG, no image compression is performed and these files can become BIG.

open (GDF,"godzilla.gd") || die; $myImage = newFromGd GD::Image(GDF) || die; close GDF;

gif

GD::Image::gif object method

This returns the image data in GIF format. You can then print it, pipe it to a display program, or write it to a file. Example:

$gif_data = $myImage->gif; open (DISPLAY,"| display -") || die; print DISPLAY $gif_data; close DISPLAY;

gd

GD::Image::gd object method

This returns the image data in GD format. You can then print it, pipe it to a display program, or write it to a file. Example:

print MYOUTFILE $myImage->gd;

Color Control

colorAllocate

GD::Image::colorAllocate(red,green,blue) object method

This allocates a color with the specified red, green and blue components and returns its index in the color table, if specified. The first color allocated in this way becomes the image's background color. (255,255,255) is white (all pixels on). (0,0,0) is black (all pixels off). (255,0,0) is fully saturated red. (127,127,127) is 50% gray. You can find plenty of examples in /usr/X11/lib/X11/rgb.txt.

If no colors are allocated, then this function returns -1.

Example:

$white = $myImage->colorAllocate(0,0,0); #background color $black = $myImage->colorAllocate(255,255,255); $peachpuff = $myImage->colorAllocate(255,218,185);

colorDeallocate

GD::Image::colorDeallocate(colorIndex) object method

This marks the color at the specified index as being ripe for reallocation. The next time colorAllocate is used, this entry will be replaced. You can call this method several times to deallocate multiple colors. There's no function result from this call.

Example:

$myImage->colorDeallocate($peachpuff); $peachy = $myImage->colorAllocate(255,210,185);

colorClosest

GD::Image::colorClosest(red,green,blue) object method

This returns the index of the color closest in the color table to the red green and blue components specified. If no colors have yet been allocated, then this call returns -1.

Example:

$apricot = $myImage->colorClosest(255,200,180);

colorExact

GD::Image::colorExact(red,green,blue) object method

This returns the index of a color that exactly matches the specified red green and blue components. If such a color is not in the color table, this call returns -1.

$rosey = $myImage->colorExact(255,100,80); warn "Everything's coming up roses.\n" if $rosey >= 0;

colorsTotal

GD::Image::colorsTotal) object method

This returns the total number of colors allocated in the object.

$maxColors = $myImage->colorsTotal;

getPixel

GD::Image::getPixel(x,y) object method

This returns the color table index underneath the specified point. It can be combined with rgb() to obtain the rgb color underneath the pixel.

Example:

$index = $myImage->getPixel(20,100); ($r,$g,$b) = $myImage->rgb($index);

rgb

GD::Image::rgb(colorIndex) object method

This returns a list containing the red, green and blue components of the specified color index.

Example:

@RGB = $myImage->rgb($peachy);

transparent

GD::Image::transparent(colorIndex) object method

This marks the color at the specified index as being transparent. Portions of the image drawn in this color will be invisible. This is useful for creating paintbrushes of odd shapes, as well as for making GIF backgrounds transparent for displaying on the Web. Only one color can be transparent at any time. To disable transparency, specify -1 for the index.

If you call this method without any parameters, it will return the current index of the transparent color, or -1 if none.

Example:

open(GIF,"test.gif"); $im = newFromGif GD::Image(GIF); $white = $im->colorClosest(255,255,255); # find white $im->transparent($white); print $im->gif;

Special Colors

setBrush, gdBrushed

GD::Image::setBrush( ) and GD::gdBrushed

You can draw lines and shapes using a brush pattern. Brushes are just images that you can create and manipulate in the usual way. When you draw with them, their contents are used for the color and shape of the lines.

To make a brushed line, you must create or load the brush first, then assign it to the image using setBrush . You can then draw in that with that brush using the gdBrushed special color. It's often useful to set the background of the brush to transparent so that the non-colored parts don't overwrite other parts of your image.

Example:

# Create a brush at an angle $diagonal_brush = new GD::Image(5,5); $white = $diagonal_brush->allocateColor(255,255,255); $black = $diagonal_brush->allocateColor(0,0,0); $diagonal_brush->transparent($white); $diagonal_brush->line(0,4,4,0,$black); # NE diagonal # Set the brush $myImage->setBrush($diagonal_brush); # Draw a circle using the brush $myImage->arc(50,50,25,25,0,360,gdBrushed);

setStyle, gdStyled

GD::Image::setStyle(@colors) and GD::gdStyled

Styled lines consist of an arbitrary series of repeated colors and are useful for generating dotted and dashed lines. To create a styled line, use setStyle to specify a repeating series of colors. It accepts an array consisting of one or more color indexes. Then draw using the gdStyled special color. Another special color, gdTransparent can be used to introduce holes in the line, as the example shows.

Example:

# Set a style consisting of 4 pixels of yellow, # 4 pixels of blue, and a 2 pixel gap $myImage->setStyle($yellow,$yellow,$yellow,$yellow, $blue,$blue,$blue,$blue, gdTransparent,gdTransparent); $myImage->arc(50,50,25,25,0,360,gdStyled);

To combine the gdStyled and gdBrushed behaviors, you can specify gdStyledBrushed . In this case, a pixel from the current brush pattern is rendered wherever the color specified in setStyle() is neither gdTransparent nor 0.

gdTiled

Draw filled shapes and flood fills using a pattern. The pattern is just another image. The image will be tiled multiple times in order to fill the required space, creating wallpaper effects. You must call setTile in order to define the particular tile pattern you'll use for drawing when you specify the gdTiled color. details.

gdStyled

The gdStyled color is used for creating dashed and dotted lines. A styled line can contain any series of colors and is created using the setStyled command.

Drawing Commands

setPixel

GD::Image::setPixel(x,y,color) object method

This sets the pixel at (x,y) to the specified color index. No value is returned from this method. The coordinate system starts at the upper left at (0,0) and gets larger as you go down and to the right. You can use a real color, or one of the special colors gdBrushed, gdStyled and gdStyledBrushed can be specified.

Example:

# This assumes $peach already allocated $myImage->setPixel(50,50,$peach);

line

GD::Image::line(x1,y1,x2,y2,color) object method

This draws a line from (x1,y1) to (x2,y2) of the specified color. You can use a real color, or one of the special colors gdBrushed, gdStyled and gdStyledBrushed.

Example:

# Draw a diagonal line using the currently defind # paintbrush pattern. $myImage->line(0,0,150,150,gdBrushed);

dashedLine

GD::Image::dashedLine(x1,y1,x2,y2,color) object method

This draws a dashed line from (x1,y1) to (x2,y2) in the specified color. A more powerful way to generate arbitrary dashed and dotted lines is to use the setStyle() method described below and to draw with the special color gdStyled.

Example:

$myImage->dashedLine(0,0,150,150,$blue);

rectangle

GD::Image::rectangle(x1,y1,x2,y2,color) object method

This draws a rectangle with the specified color. (x1,y1) and (x2,y2) are the upper left and lower right corners respectively. Both real color indexes and the special colors gdBrushed, gdStyled and gdStyledBrushed are accepted.

Example:

$myImage->rectangle(10,10,100,100,$rose);

filledRectangle

GD::Image::filledRectangle(x1,y1,x2,y2,color) object method

This draws a rectangle filed with the specified color. You can use a real color, or the special fill color gdTiled to fill the polygon with a pattern.

Example:

# read in a fill pattern and set it open(GIF,"happyface.gif") || die; $tile = newFromGif GD::Image(GIF); $myImage->setTile($tile); # draw the rectangle, filling it with the pattern $myImage->filledRectangle(10,10,150,200,gdTiled);

polygon

GD::Image::polygon(polygon,color) object method

This draws a polygon with the specified color. The polygon must be created first (see below). The polygon must have at least three vertices. If the last vertex doesn't close the polygon, the method will close it for you. Both real color indexes and the special colors gdBrushed, gdStyled and gdStyledBrushed can be specified.

Example:

$poly = new GD::Polygon; $poly->addPt(50,0); $poly->addPt(99,99); $poly->addPt(0,99); $myImage->polygon($poly,$blue);

filledPolygon

GD::Image::filledPolygon(poly,color) object method

This draws a polygon filled with the specified color. You can use a real color, or the special fill color gdTiled to fill the polygon with a pattern.

Example:

# make a polygon $poly = new GD::Polygon; $poly->addPt(50,0); $poly->addPt(99,99); $poly->addPt(0,99); # draw the polygon, filling it with a color $myImage->filledPolygon($poly,$peachpuff);

arc

GD::Image::arc(cx,cy,width,height,start,end,color) object method

This draws arcs and ellipses. (cx,cy) are the center of the arc, and (width,height) specify the width and height, respectively. The portion of the ellipse covered by the arc are controlled by start and end, both of which are given in degrees from 0 to 360. Zero is at the top of the ellipse, and angles increase clockwise. To specify a complete ellipse, use 0 and 360 as the starting and ending angles. To draw a circle, use the same value for width and height.

You can specify a normal color or one of the special colors gdBrushed, gdStyled, or gdStyledBrushed.

Example:

# draw a semicircle centered at 100,100 $myImage->arc(100,100,50,50,0,180,$blue);

fill

GD::Image::fill(x,y,color) object method

This method flood-fills regions with the specified color. The color will spread through the image, starting at point (x,y), until it is stopped by a pixel of a different color from the starting pixel (this is similar to the "paintbucket" in many popular drawing toys). You can specify a normal color, or the special color gdTiled, to flood-fill with patterns.

Example:

# Draw a rectangle, and then make its interior blue $myImage->rectangle(10,10,100,100,$black); $myImage->fill(50,50,$blue);

GD::Image::fillToBorder(x,y,bordercolor,color) object method

Like fill , this method flood-fills regions with the specified color, starting at position (x,y). However, instead of stopping when it hits a pixel of a different color than the starting pixel, flooding will only stop when it hits the color specified by bordercolor. You must specify a normal indexed color for the bordercolor. However, you are free to use the gdTiled color for the fill.

Example:

# This has the same effect as the previous example $myImage->rectangle(10,10,100,100,$black); $myImage->fillToBorder(50,50,$black,$blue);

Image Copying Commands

With either of these methods it is important to know that the routines will attempt to flesh out the destination image's color table to match the colors that are being copied from the source. If the destination's color table is already full, then the routines will attempt to find the best match, with varying results.

copy

GD::Image::copy(sourceImage,dstX,dstY,srcX,srcY,width,height) object method

This is the simpler of the two copy operations, copying the specified region from the source image to the destination image (the one performing the method call). (srcX,srcY) specify the upper left corner of a rectangle in the source image, and (width,height) give the width and height of the region to copy. (dstX,dstY) control where in the destination image to stamp the copy. You can use the same image for both the source and the destination, but the source and destination regions must not overlap or strange things will happen.

Example:

$myImage = new GD::Image(100,100); ... various drawing stuff ... $srcImage = new GD::Image(50,50); ... more drawing stuff ... # copy a 25x25 pixel region from $srcImage to # the rectangle starting at (10,10) in $myImage $myImage->copy($srcImage,10,10,0,0,25,25);

copyResized

GD::Image::copyResized(sourceImage,dstX,dstY,srcX,srcY,destW,destH,srcW,srcH) object method

This method is similar to copy() but allows you to choose different sizes for the source and destination rectangles. The source and destination rectangle's are specified independently by (srcW,srcH) and (destW,destH) respectively. copyResized() will stretch or shrink the image to accomodate the size requirements.

Example:

$myImage = new GD::Image(100,100); ... various drawing stuff ... $srcImage = new GD::Image(50,50); ... more drawing stuff ... # copy a 25x25 pixel region from $srcImage to # a larger rectangle starting at (10,10) in $myImage $myImage->copyResized($srcImage,10,10,0,0,50,50,25,25);

Character and String Drawing

string

GD::Image::string(font,x,y,string,color) Object Method

This method draws a string startin at position (x,y) in the specified font and color. Your choices of fonts are gdSmallFont, gdLargeFont, gdMediumBoldFont, and gdTinyFont.

Example:

$myImage->string(gdSmallFont,2,10,"Peachy Keen",$peach);

stringUp

GD::Image::stringUp(font,x,y,string,color) Object Method

Just like the previous call, but draws the text rotated counterclockwise 90 degrees.

char, charUp

GD::Image::char(font,x,y,char,color) Object Method GD::Image::charUp(font,x,y,char,color) Object Method

These methods draw single characters at position (x,y) in the specified font and color. They're carry-overs from the C interface, where there is a distinction between characters and strings. Perl is insensible to such subtle distinctions.

Miscellaneous Image Methods

interlaced

GD::Image::interlaced( ) GD::Image::interlaced(1) Object method

This method sets or queries the image's interlaced setting. Interlace produces a cool venetian blinds effect on certain viewers. Provide a true parameter to set the interlace attribute. Provide undef to disable it. Call the method without parameters to find out the current setting.

<getBounds>

GD::Image::getBounds( ) Object method

This method will return a two-member list containing the width and height of the image. You query but not not change the size of the image once it's created.

Polygons

<new>

GD::Polygon::new class method

Create an empty polygon with no vertices.

$poly = new GD::Polygon;

addPt

GD::Polygon::addPt(x,y) object method

Add point (x,y) to the polygon.

$poly->addPt(0,0); $poly->addPt(0,50); $poly->addPt(25,25); $myImage->fillPoly($poly,$blue);

getPt

GD::Polygon::getPt($index) object method

Retrieve the point at the specified vertex.

($x,$y) = $poly->getPt(2);

setPt

GD::Polygon::setPt(index,x,y) object method

Change the value of an already existing vertex. It is an error to set a vertex that isn't already defined.

$poly->setPt(2,100,100);

deletePt

GD::Polygon:deletePt(index) object method

Delete the specified vertex, returning its value.

($x,$y) = $poly->deletePt(1);

length

GD::Polygon::length object method

Return the number of vertices in the polygon.

$points = $poly->length;

vertices

GD::Polygon::vertices object method

Return a list of all the verticies in the polygon object. Each membver of the list is a reference to an (x,y) array.

@vertices = $poly->vertices; foreach $v (@vertices) print join(",",@$v),"\n"; }

bounds

GD::Polygon::bounds object method

Return the smallest rectangle that completely encloses the polygon. The return value is an array containing the (left,top,right,bottom) of the rectangle.

($left,$top,$right,$bottom) = $poly->bounds;

offset

GD::Polygon::offset(dx,dy) object method

Offset all the vertices of the polygon by the specified horizontal (dh) and vertical (dy) amounts. Positive numbers move the polygon down and to the right.

$poly->offset(10,30);

map

GD::Polygon::map($srcL,$srcT,$srcR,$srcB,$destL,$dstT,$dstR,$dstB) object method

Map the polygon from a source rectangle to an equivalent position in a destination rectangle, moving it and resizing it as necessary. See polys.pl for an example of how this works. Both the source and destination rectangles are given in (left,top,right,bottom) coordinates. For convenience, you can use the polygon's own bounding box as the source rectangle.

# Make the polygon really tall $poly->map($poly->bounds,0,0,50,200);

Font Utilities

gdSmallFont

GD::Font::gdSmallFont constant

This is the basic small font, "borrowed" from a well known public domain 6x12 font.

gdLargeFont

GD::Font::gdLargeFont constant

This is the basic large font, "borrowed" from a well known public domain 8x16 font.

GD::Font::gdMediumBoldFont constant

This is a font intermediate in size between large and small. It's boldfaced, and borrowed from a public domain 7x13 font.

GD::Font::gdTinyFont constant

This is a tiny, almost unreadable font, 5x8 pixels wide.

nchars

GD::Font::nchars object method

This returns the number of characters in the font.

print "The large font contains ",gdLargeFont->nchars," characters\n";

offset

GD::Font::offset object method

This returns the ASCII value of the first character in the font

width, height

GD::Font::width GD::Font::height object methods

These return the width and height of the font.

($w,$h) = (gdLargeFont->width,gdLargeFont->height);

Copyright Information

The latest versions of the perl interface are available at http://www-genome.wi.mit.edu/ftp/pub/software/WWW/GD.pm.tar.Z , and ftp://ftp-genome.wi.mit.edu/pub/software/WWW/GD.pm.tar.Z

Last Modified 7/13/95